Compliance Results (Asset Configuration Management) |
The Compliance Results table displays the details about the compliance errors for the specified asset or equipment.
Equipment ID
Identifier of the asset or equipment.
Rule type
The rule that caused the error. The following options are available:
COMPONENT - A component is out of compliance.
ATTRIBUTE - An attribute is out of compliance.
Result code and Result description
The specific code of the error and the description of that error. The following is the list of potential error codes and descriptions.
Compliance Error Code |
Description |
2674 |
Missing component |
2675 |
Child components have compliance errors (Informational only. Will not show in web module views.) |
2677 |
Serialized part missing |
2678 |
Serialized part insufficient quantity installed |
2679 |
Attribute missing |
2680 |
Attribute text mismatch |
2681 |
Attribute value is outside of minimum and maximum range |
2682 |
Attribute missing |
2684 |
Component position is not supported |
2685 |
Serialized part position is not supported. |
Part ID and suffix
Identifier of the part that is out of compliance.
Note: When compliance is run against equipment and there are errors at the parent level of the model (the main asset before going into its components), the errors are called out as being on the Child Model Component ID of -1. This indicates that the error is a discrepancy between the root asset and primary model records.
Position ID
Position of the asset or equipment that is out of compliance.
Subsystem
Subsystem of the part that is out of compliance.
Note: ACM Compliance real-time check will not report when attributes are missing when a subsystem is updated for a different attribute in the subsystem. These will be reported as missing when compliance runs are performed or an asset is set in service.
Property
Description of the part that is out of compliance.
Required for service
A check in this box indicates the asset or equipment requires service to be brought into compliance.
Child Model Component ID
ID of the related child model component.
Component ID
ID of the related Component.
Part serial number
Serial number of the related part.
Compliance result ID
ID of the Compliance result.